Agent indication description

Ethernet interface (10/100Base-T)

There is a standard Ehernet connection indicators set placed on Agent board. Ethernet interface used for data exchange between Agent board and SNT software. #LINK

Indication	Description
10/100	On - connection established at 100 Mbps (normal state). Off - connection established at 10 Mbps (degraded state)
COLL	Off - normal state. Flashing, On - network collision detected. May occure when ethetnet hub (not swith) used. We recommends use direct connection between network card and Agent board or ethernet switch if not possible.
FDUP	On - full duplex mode (normal state). Off - half duplex mode (degraded state, try to change network board media configuration, or replce cable)
LINK	On - connection established. Flashing - data exchange in a progress. Off - no connection